Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut laboreso et dolore magna aliqua Ut enim ad minim veniam
DESCRIPTION
The process of dehumidifying air with solid adsorbents involves use of the properties of an agent with a high affinity for water. Our systems include a desiccant rotor based on silica gel (SiO2) or molecular sieves. These systems can be used down to very low humidity (-60°C dew point).
They have the advantage of being able to use energies other than electricity to dehumidify the air, such as superheated water, steam or gas with a burner directly in the air stream.
The third-generation PPS and PPX silica gel desiccant rotors that equip our air dryers have very high levels of active silica gel, ensuring very high dehumidification performance and reducing energy consumption compared to devices equipped with other silica gel desiccant rotors of the same dimensions.
DÉTAILS TECHNIQUES
Standalone air dryers with electrical regeneration, hot water + electric, direct steam or gas.
TECHNICAL DATA SHEETS
Standard air dryers
AIR DRYERS FOR OPEN CIRCUIT
| Type | Rated capacity
at 20°C and 60% |
Dry air flow rate range | Nominal dry air flow rate | Total power Electric regeneration version | Weight | Datasheet |
| DT-160 | 0,6 kg/h | de 90 à 190 m³/h | 190 m³/h | 1.0 kW | 14 kg |  |
| DT-250 | 1,1 kg/h | de 150 à 290 m³/h | 250 m³/h | 1,4 kW | 18 kg | |
| DT-440 | 1,4 kg/h | de 220 à 440 m³/h | 440 m³/h | 2,1 kW | 15 kg | |
DOUBLE FAN AIR DRYERS
| Type | Rated capacity
at 20°C and 60% |
Dry air flow rate range | Nominal dry air flow rate | Total power Electric
regeneration version |
Weight | Datasheet |
| DT-210 | 0,6 kg/h | de 100 à 210 m³/h | 210 m³/h | 1,1 kW | 16,5 kg | |
| DT-400 | 1,4 kg/h | de 200 à 420 m³/h | 400 m³/h | 2,3 kW | 23 kg | |
| DT-620 | 2,3 kg/h | de 300 à 620 m³/h | 620 m³/h | 3,5 kW | 25 kg | |
| DT-800 | 4,4 kg/h | de 400 à 1000 m³/h | 800 m³/h | 7 kW | 80 kg | |
| DT-1100 | 6 kg/h | de 500 à 1300 m³/h | 1100 m³/h | 10 kW | 80 kg | |
| DT-1300 | 9,5 kg/h | de 600 à 1500 m³/h | 1300 m³/h | 13,6 kW | 230 kg | |
| DT-2300 | 13,7 kg/h | de 1000 à 2300 m³/h | 2300 m³/h | 19 kW | 230 kg | |
| DT-3300 | 14,6 kg/h | de 2000 à 3500 m³/h | 3300 m³/h | 20,4 kW | 235 kg | |
| DT-4000 | 20,1 kg/h | de 1600 à 4000 m³/h | 4000 m³/h | 30 kW | 240 kg | |
| DT-4500 | 24,6 kg/h | de 3000 à 5500 m³/h | 4500 m³/h | 40,8 kW | 410 kg | |
| DT-5800 | 29,3 kg/h | de 2300 à 5800 m³/h | 5800 m³/h | 44,5 kW | 500 kg | |
DOUBLE FAN AIR DRYERS WITH INTEGRATED HEAT RECOVERY
| Type | Rated capacity
at 20°C and 60% |
Dry air flow rate range | Nominal dry air flow rate | Total power Electric regeneration version | Weight | Datasheet |
| DT-6000 | 39 kg/h | de 4000 à 7500 m³/h | 6000 m³/h | 54,2 kW | 900 kg | |
| DT-8000 | 53 kg/h | de 5000 à 8500 m³/h | 8000 m³/h | 80,5 kW | 950 kg | |
| DT-13000 | 86 kg/h | de 8000 à 14000 m³/h | 13000 m³/h | 143,5 kW | 1350 kg | |
Air dryers especially for negative cold rooms
* Capacités données au débit d’air sec nominal pour un air traité saturé en humidité avec un air de régénération pris à 5°C
| Type | Rated capacity at 20°C and 60% | Dry air flow rate range | Nominal dry air flow rate | Regeneration air flow rate | Total power
Electric regeneration version |
Weight | Datasheet |
| DT-1500 IR/ICF | 30,1 kg/24h 2,9°C |
18,4 kg/24h 2,4°C |
1500 m3/h 200 Pa |
220 m3/h | 6,1 kW | 290 kg / 200 kg | |
| DT-2600 IR/ICF | 47,8 kg/24h 2,5°C |
30,4kg/24h 2,0°C |
2600 m3/h 200 Pa |
300 m3/h | 10,5 kW | 290 kg/200 kg | |
| DT-4000 IR/ICF | 72,8 kg/24h 3,6°C |
46,1 kg/24h 3,1°C |
46,1 kg/24h 200 Pa |
400 m3/h | 14,8 kW | 320 kg/230 kg | |
| DT-5800 ICF | 111,2 kg/24h 3,8°C |
69,3 kg/24h 3,2°C |
5800 m3/h 300 Pa |
600 m3/h | 20,4 kW | 500 kg | |
DT-1500/2600/4000
*Version IR : Rajouter 140 mm
DT-5800 ICF
